Skip Navigation Website Accessibility
 


White 1/24 SCX24 Jeep Wrangler JLU CRC Rock Crawler 4WD RTR

The SCX24 2019 Jeep Wrangler JLU CRC 1/24 4WD RTR Scale Mini Crawler with 2.4GHz radio is hitting the scene ready for RC adventures. Despite being scaled down to a compact size, this mini crawler is ready for some big adventures. Get bored at work? Crawl this guy across your desk, we wont tell HR. That laundry you forgot to put away is now a mountain for your SCX24 to climb and conquer. Take this car outside, where its water-resistant electronics are safe from the elements, and make your own course from whatever sticks and rocks are in your yard or local park. The possibilities are endless with this mighty mini.

Full-time 4WD and a 3-link front/4-link rear suspension let you muscle over big challenges. Worm gears on the axles increase ground clearance, while realistic steel frame rails stand up to hard knocks. The Axial SCX24 Jeep Wrangler JLU CRC performs like a winner and looks like one, too. The realistic body rides on licensed KMC Machete wheels and Nitto Trail Grappler tires. For quick battery access, just remove one clip to tilt back the body. Two LEDs in the front bumper light up the trail for night-time crawling. The SCX24 Jeep Wrangler JLU CRC comes ready-to-run with radio and electronics included and installed.

Features:

  • Includes radio transmitter and receiver and battery.
  • Comes with ESC, motor, and servo already installed.
  • Features a realistic new body design.
  • Licensed wheels are modeled after 1:1 KMC Machete Wheels.
  • Licensed tires are modeled after 1:1 Nitto Trail Grappler M/T tires.
  • 3-Link front and 4-link rear suspension provides optimal handling.

Specifications:
Approximate Assembly Time: No assembly required
Ball Bearings: Full set
Batteries: Dynamite 7.4V 350mAh 30C LiPo
Body: Axial Jeep JL Hardtop
Brakes: Integral with ESC
Charger: USB LiPo Charger
Chassis: Stamped Steel Chassis Rails
Completion Level: Ready-To-Run
Differential: Worm Gear 16T/4T
Drivetrain: 4WD
Ground Clearance: 1.06" (27mm)
Height: 4.2" (106.5mm)
Length: 7.8" (199.5mm)
Motor Size: 180
Motor Type: Brushed 180 size, 88 turn
Pinion: 10T
Radio: Axial AX-4 2.4GHz 2-Channel
Servos: AS-1 Micro Steering Servo
Shock Type: Coil-Over, Plastic Body, .9 - 1.3" (24 - 33.4mm)
Size/Scale: 1/24
Speed Control: AE-6 ESC/RX with Reverse
Spur Gear: 55T
Suspension: 3 Link Front and 4 Link Rear
Tire Diameter: 2.0" (51mm)
Tire Tread: Nitto Trail Grappler M/T
Track: Front and Rear, 3.9" (99.5mm) distance from outer edges of tires measured side-to-side
Vehicle Type: Desert Crawler
Water-Resistant: Yes
Wheel Diameter: 1.0" (26mm)
Wheel Type: Plastic KMC Machete, black in color
Wheel Width: .48" (12.4mm)
Wheelbase: 5.2" (132.5mm)
Width: 3.9" (99.5mm)

Includes:
(1) AX-4 2.4GHz 2-Channel Radio
(1) AE-6 Forward/Reverse ESC/Rx
(1) SCX24 88T Motor with Pinion
(1) AS-1 Micro Servo
(1) Dynamite® 7.4v 350mAh 2S LiPo Battery
(1) USB Charger
(4) AA Batteries




AXI00002V2T2