Fuze 6-pole 540 4WD SCT WP Sensorless BL Combo V2
Features
- MOTOR: 6-pole design for high power and superior efficiency
- Improved rotor and stator design for elevated power output and enhanced efficiency
- Comes pre-wired for easy installation with bullet plugs
- Ball bearing construction provides low drag and long life
- Designed to work with most 1/10-scale sensorless brushless ESCs
- ESC: Easier than ever to toggle between battery chemistries
- Improved operation under heavy loads
- Allows a hard mount, with servo tape and/or velcro
- Waterproof
- Compact design for easy fit into most any 1/8th scale on and off road platform
- Easy to program via your transmitter or compact program card. No need to haul around a PC
Overview
Dynamite’s brushless systems offer price sensitive enthusiasts the ultimate solution when searching for an easy and affordable method of stepping up to brushless power. Designed for most on and off road electric vehicles, each system comes with everything users need to upgrade to brushless power. Systems include a potent 6-pole sensorless brushless motor and waterproof ESC that comes pre-wired with a high-current EC series connector. The ESC is Ni-MH and Li-Po/Li-Fe compatible. And, as with all Dynamite power systems, motors and ESC’s are available separately.
Dynamite’s brushless systems are compatible with most 1/8th scale on and off‐road electric vehicles including 1/8th scale ECX, Losi, HPI, Traxxas, Associated and many more.
DYNS1409 - Fuze 130A Sensorless Brushless ESC: 4WD SCT 1/8
Specifications:
Forward: Yes
Reverse: Yes
Brake: Yes
Time Delay Brake: Yes
Continuous Maximum Current: 130A
Input Voltage: 6-12 cells NiMH - NiCd, 2-4 cells LiPo - LiFe
Motor Limit: 2S LiPo - up to 6000KV, 3S LiPo - up to 4000KV, 4S - up to 3000KV
Momentary Peak Current: 760A
Length: 53.5mm
Width: 36mm
Height: 36mm
Weight: 79g
BEC Voltage: 6V
PWM Frequency: 8kHz
Overload Protection: Yes
Full On Resistance: 0.0004 ohm
DYNS1620 - Fuze 540 6-Pole Brushless Motor 3900Kv, 4wd SCT V2
Specifications:
Type: Brushless Inrunner
Size: 540
Bearings or Bushings: Two 5X13x4mm Bearings
# of Turns/Windings: Multistrand copper
Voltage: 3.7 - 8.4V
RPM/Volt (Kv): 3900Kv
Idle Current (Io): 3.5 +/-0.5A @7.2V
Cells: 4-9 cells NiMH/NiCd 1-3 cells LiPo/LiFe
Speed Control: 130A
Weight: 6.42oz (182g)
Overall Diameter: 1.41 in (35.8mm)
Shaft Diameter: 5mm
Shaft Length: 0.6 in (15mm)
Overall Length: 1.9 in (54mm)