Skip Navigation Website Accessibility
 


Mamba Micro X2 Crawler WP Sensored Brushless ESC

Castle Creations Mamba Micro X2 Crawler Waterproof Sensored Brushless ESC

Connectors: 4.0mm bullets

NOTE: Use of an external BEC is required if running a high power or digital servo. 

Features:

  • Input Voltage range 2S-4S
  • Adjustable BEC 5.5V or 7.5V (2A Peak), default 5.5V
  • Waterproof design
  • Sensored Motor capable 
  • Convenient transmitter programming for six common adjustable settings
  • Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (coupon included with purchase) or the Castle Link App for Android or iOS and a B-LINK Bluetooth Adapter (sold separately)
  • Telemetry Ready (Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters)
  • Auxiliary Wire Functionality allows for “on-the-fly” adjustments such as Max Power and Max Brake
  • Audible Alerts that will notify you of possible issues with calibrations and error conditions
  • Designed and manufactured in Olathe, Kansas and is backed by manufacturer 1-year warranty
Recommended Motors: 
Castle 0808 4100Kv: Max Cells: 3S Lipo or 8 NiMH
Castle 0808 5300Kv: Max Cells: 3S Lipo or 8 NiMH
Castle 0808 8200Kv: Max Cells: 2S Lipo or 8 NiMH

Max. Recommended Vehicle Weight: 2.25 lbs, with batteries, ready-to-run

Application Guidelines: 
1:14 scale RC hobby vehicles weighing up to 3.0lbs and 1/10 scale low speed crawler vehicles up to 9lbs.

Input Voltage Range: 2S-4S LiPo (16.8V Max)

BEC: Adjustable; 5.5V or 7.5V (default 5.5V) 2A Peak
Product Use Statements: 
  • Applying voltages higher than 16.8 volts will cause irreparable damage to your controller, voiding your warranty.
  • Minimum recommended battery capacity for 1:18 scale vehicles is 1500mAh. Castle recommends using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell).
  • Mamba Micro X Crawler has 4.0mm bullet connectors on the motor wires and the battery input wires are bare. You must add the connector of your choice to the battery leads. Castle recommends a high current connector rated for at least 40 amps.
  • Although the Mamba Micro X2 is waterproof, it is not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC with clean water after exposure to corrosives or dirt. While the controller may be waterproof, Castle suggests users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.
Needed to Complete:
  • Battery Connector: Castle 4.0mm Polarized Connectors, Deans Ultra Plugs and XT60 are recommended.