FUZE 1/10 6-pole 3800Kv SCT V2
Features
- MOTOR: 6-pole design for high power and superior efficiency
- Improved rotor and stator design for elevated power output and enhanced efficiency
- Comes pre-wired for easy installation with bullet plugs
- Ball bearing construction provides low drag and long life
- Designed to work with most 1/10-scale sensorless brushless ESCs
- ESC: Easier than ever to toggle between battery chemistries
- Improved operation under heavy loads
- Allows a hard mount, with servo tape and/or velcro
- Waterproof
- Compact design for easy fit into most any 1/10th scale on and off road platform
- Easy to program via your transmitter or compact program card. No need to haul around a PC
Overview
Dynamite’s brushless systems offer price sensitive enthusiasts the ultimate solution when searching for an easy and affordable method of stepping up to brushless power. Designed for most on and off road electric vehicles, each system comes with everything users need to upgrade to brushless power. Systems include a potent 6-pole sensorless brushless motor and waterproof ESC that comes pre-wired with a high-current EC series connector. The ESC is Ni-MH and Li-Po/Li-Fe compatible. And, as with all Dynamite power systems, motors and ESC’s are available separately.
Dynamite’s brushless systems are compatible with most 1/10th scale on and off?road electric vehicles including 1/10th scale ECX, Losi, HPI, Traxxas, Associated and many more.
DYNS0706 - Fuze 70A Sensorless Brushless ESC Waterproof V2
Specifications:
Forward: Yes
Reverse: Yes
Brake: Yes
Time Delay Brake: Yes
Continuous Maximum Current: 70A
Input Voltage: 2-3S LiPo/LiFe, 4-9 cells NiMh/HiCd
Input Connector Types: EC3
Output Connector Types: 3..5mm Bullet
Motor Limit: 2S LiPo - up to 6000KV, 3S LiPo - up to 4000KV
Length: 1.89 in (48mm)
Width: 2.2 in (56.1mm) with mounting tabs, 1.46 in (37mm) without mounting tabs
Height: 1.46 in (37mm)
Weight: 2.82 oz (80 g)
BEC Voltage: 6V
Overload Protection: Yes
Full On Resistance: .0012 ohm
Wire Gauge: Battery 14AWG, 6 in/Motor 16 AWG, 4 in
DYNS1606 - Fuze 6-Pole Brushless Motor 3800Kv, SCT V2
Specifications:
Type: Brushless Inrunner
Size: 540
Bearings or Bushings: Two 5X13x4mm Bearings
Timing: Not Adjustable
Voltage: 4.5-12.6V
RPM/Volt (Kv): 3800Kv
Idle Current (Io): 3.0+/-0.5A @ 7.2V
Maximum Burst Current: 130A
Speed Control: 70A
Weight: 6.9oz (198g)
Overall Diameter: 1.41 in (35.8mm)
Shaft Diameter: 1/8 in (3.175mm)
Shaft Length: 0.59 in (15mm)
Overall Length: 2.05 in (52mm)