RX4 WP BL Sensored/Sensorless D2 BL ESC

Tekin RX4 Hardbox Waterproof Sensored/Sensorless D2 Crawler ESC

Tekin’s RX4 Brushless Sensored ESC is designed to power your Chassis past any obstacle. With massive power handling capabilities, a water proof design and all the customization features you’d expect from a Tekin ESC; the RX4 has you covered no matter the situation. Not only reliable, this ESC has a host of built in features like a High Voltage BEC, Drag Brake, Data logging and the ability to run either Brushed or Brushless motors. The RX4 defines versatility. 
The RX4 Housing is a thick-walled, reinforced Hardbox design able to withstand the elements and rough environments that come with true Offroad adventuring. 
Rocks, Dirt, Snow, Sand, Mud, Trail and Track; the RX4 is no-limits RC fun. 
Designed to run Tekin ROC 412 and ROC 412HD motors 

Designed to run Tekin ROC 412 and ROC 412HD motors:

2s Lipo up to 4400kV 
3s Lipo up to 3100kV 
4s Lipo up to 2300kV

Features

• Easily Access Programming, Anywhere, Anytime
• QuickTune One-Touch Programming
• HotWire Compatible
• D2: Dual Drive Mode Technology
• On-Board Temperature Indicator
• HDAC: High Density Copper FET Boards
• Solder Posts for Easy Wiring
• Heatsink and Fan w/ Auto-on-Temp Sensing
• One-Touch Radio Calibration
• HV BEC
• DATA Logging
• Water Proof

Features:

• Easily Access Programming, Anywhere, Anytime
• QuickTune One-Touch Programming
• HotWire Compatible
• D2: Dual Drive Mode Technology
• On-Board Temperature Indicator
• HDAC: High Density Copper FET Boards
• Solder Posts for Easy Wiring
• Heatsink and Fan w/ Auto-on-Temp Sensing
• One-Touch Radio Calibration
• High Voltage BEC
• DATA Logging
• Waterproof hardbox design

Programmable Features:

• DB: Drag Brake (13 steps)
• BS: Brake / Reverse Strength (13 steps)
• LM: Torque Limiter (7 steps)
• NW: Neutral Width (13 steps)
• TP: Timing Profiles 5 Presets - 2 Custom
• MT: Brushless Modes: Fwd/Brk, Fwd/Rev, Rev Delay; Brushed: Fwd/Brk, Fwd/Rev, Fwd/Rev Delay
• VC: Voltage Cutoffs: 2S, 3S, 4S and Custom
• Extensive Tuning via Tekin HotWire (sold separately; TEKTT1451)
• Custom Throttle Profiles
• Adjustable Throttle and Brake Minimums
• Adjustable Throttle and Brake Frequencies

Specifications:
Controls: Forward/Brake/Reverse
Input Voltage: 2S to 4S Lipo
Continuous Current: 240 Amps *per phase
BEC: HV 6.0V-7.4V / 8 Amp Switching
Motor Type: Brushed/Brushless, Sensored/Sensorless; 2Pole or 4Pole Motors
Motor Limit Brushless/Brushed Mode: No Limit
Dimensions: 1.6 x 2.0 x 1.4” / 40.6 x 50.8 x 35.5mm
Weight Approx: 2.65oz / 75.5grams